How to Maintain Your Industrial Vacuum Filter: 5 Easy Tips

Industrial vacuum cleaners are meant to remove hazardous dust and fumes, whether it is in a confined area or inside of a commercial establishment that comes into contact with such materials. It ensures indoor air quality remains clean and working conditions stay healthy.

Industrial vacuum cleaners handle a large amount of harsh elements, which can often lead to wear and tear, unless you employ a number of measures that enhance its lifespan.

The one aspect that can help you achieve this ultimate objective is the industrial filter. Proper filter maintenance starts at the filter selection part, and persists during installation, monitoring and replacement. By doing this, the environment stays clean and dust-free.Although the newest generations of industrial vacuum filters do require little maintenance, it is still a wise idea to incorporate the upkeep of these filters, considering it’s a hefty investment.

Here are five tips for maintaining your industrial vacuum filter:

🔩 1. Choose the Right Industrial Vacuum Filter

As you peruse through the vast selection of industrial vacuum filters, you will conclude one thing: there are many to choose from. But you must pick one that matches your environment.

There isn’t particularly a generic filter you can opt for. There are filters that specialize in conductive metal dust, explosion proof and microparticles.

You need to determine what the industrial vacuum will be used for and then use the right one.

🔩 2. Avoid Vacuuming Liquids in Dry Areas

It is true that manufacturers understand that your industrial vacuum device will not be regularly taken care of and that it needs to be durable because you don’t want to get a new one. Therefore, they will develop machines that can withstand anything. However, there is one factor you must take into account: liquids.

Experts purport that you must never use your industrial vacuum to pick up liquids in dry areas.

🔩 3. Toss Out the Junk in the Bag or Canister

To ensure that you are performing an incredible job cleaning your industrial site, you must regularly clean out the junk that is found inside the bag or canister. If the dirt piles up then the vacuum won’t suck up anything, and then you’ll be put at risk since the hazardous particles remain in the vicinity.

Simply put: take the time to toss out the stuff in the bag – and wear gloves and goggles.

🔩 4. Replace the Main Filter After Three Years

The main filter of your industrial vacuum will be large, pleated and durable. Just how durable is it? Well, the main filter will last anywhere from three to five years – or even longer depending on the performance of the vacuum. Of course, it is wise to replace the filter after three years.

By doing this, you can extend the life of the vacuum and make the cleaning easier.

🔩 5. Your HEPA Filter Should be Gone After 1,000 Hours

In regards to the HEPA filter, it is recommended that you get rid of the HEPA after approximately 1,000 hours of use. This can be hard to manage, but here is a bit of advice: if you’re using your industrial vacuum at least 12 hours a day then the filter will need to be replaced soon; if you’re using it for a few minutes a day then it will be there longer.

The key thing to note about all industrial filters is that the manufacturers understand how much wear and tear it will endure over time. For the most part, they can be active for several years until they need to be replaced, which depends upon how much and what type of debris is sucked in. In reality, the industrial filters are the most important part of any vacuum.If you pay attention to the filters then you will see an effective vacuum with a high lifecycle.